Toshiba has picked a four-pin package for its latest third-generation silicon carbide mosfets. “Devices in the TWxxxZxxxC series are the first Toshiba SiC products to be housed in a TO-247-4L(X) package with a fourth pin,” according to the company. “This allows the provision of a Kelvin connection of the signal source terminal for the gate drive, thereby reducing the parasitic ...
Navitas is claiming it can deliver 3,200W from a 40 x 73.5 x 185mm (544cm3) data centre power supply, which is 5.9W/cm3 and almost 100W/in3. Called CRPS185, it has a 1U CRPS (common redundant power supply) form-factor. Inside, the architecture starts with an interleaved CCM (continuous conduction mode) PFC (power factor corrector) and continues into a full-bridge LLC (inductor-inductor-capacitor) converter ...
Advancing electrical safety and energy efficiency with RCD and PMD technology integration. Bituo Technik, a Shanghai-based technology provider, has gained recognition as a leading supplier of Residual Current Devices (RCDs). Their expertise in RCDs is evident through the integration of type-A/F leakage current detection ICs and type-EV/B leakage current sensors into various electrical protection devices across Asia and Europe, including ...
Nexperia has created a dc-dc converter chip designed to extend the life of 3V primary coin cells in bursty IoT applications, such as those with pulsed radio transmitters. “The IC’s designed to extend the life of a typical non-rechargeable lithium coin cell battery while also increasing peak output current by up to 25x compared to what a typical coin cell ...
Texas Instruments has created a series of precision current monitors with digital outputs, for use across power rails from -100mV to +85V, at up to ±78.64A. In each case, an internal ΣΔ ADC measures current across an integrated sensing resistor, as well as voltage and temperature – communication with the host if via I2C. The ICs need a separate supply ...
STMicroelectronics has created its first galvanically isolated gate driver for GaN transistors. Called STGAP2GS the wide body SO-8W packaged single-channel driver can work with rails up to 1.2kV. The package is 5.8mm long by 10.3mm across pins tips, with 7.5mm between leg roots on either side of the isolation barrier. A separate supply (above), or dual supplies (left) if a ...
Nexperia has entered the IGBT market, with a 600V 30A device, to be followed by 40, 50 and 75A types. “IGBT is a relatively mature technology,” said the company. “Nonetheless, the market for these devices is expected to grow in line with the increased adoption of solar panels and electric vehicle chargers. Nexperia’s 600V IGBTs feature a carrier-stored trench-gate field-stop ...
CorPower Ocean has resumed the deployment of its commercial-scale C4 wave energy generator, following repairs at Portugal’s Aguçadoura offshore wave energy test site. Earlier this year, CorPower found cable damage at the site, recovered the cable using remotely-operated vehicles and construction vessels, and refurbished the link. “With the site infrastructure restored, CorPower Ocean has resumed the deployment programme by testing ...
ABB is focussing on companies exporting heavy equipment to the US with a series of long-life motors built to meet NEMA requirements. Constructed with NEMA 5800 (368.5mm, 14.5inch shaft height) frames, the induction motors can deliver up to 1,750 horse power. They have “high-strength welded steel frame construction usually reserved for larger motors reduces stress and vibration to ensure a ...
Würth Elektronik and STMicroelectronics are demonstrating a brushless dc motor power tool power circuit developed between them. The demo is based on the STDES-PTOOL3A evaluation board. “The Gerber files, bill of materials, schematics and all other reference materials are downloadable from ST.com without charge,” according to Wurth. From ST comes the STM32G4 (Cortex-M4) MCU, STDRIVE101 gate driver and six STL220N6F7 ...
