Fluke Networks has launched its CertiFiber Max tool for high-density, multi-fiber testing in data centres. The Norwich-based company describes it as the first third-generation optical loss test set (OLTS) designed for the demands of high-density data centre environments required for AI. “As AI reshapes data centres and the digital infrastructure they depend on, the margin for error in fibre networks ...
Fluke has launched a pocket-sized thermal camera that plugs into mobile phones. It has a resolution of 256 x 192, a 25Hz frame-rate and a temperature range of -10 to +550°C (±2% or ±2°C). The camera has “real-time high and low temperature markers, with comprehensive temperature analysis for spot, line and area, supported with a thermal imaging app”, said the ...
Fluke once again has solar power engineers in mind with a pair of instruments, both true-RMS, CAT III and rated to 1,500V: the 283 FC digital multimeter and the a283 FC wireless ac and dc current clamp. These follow on from April’s PVA-1500HE2 and 1,500V 30A solar installation analyser and I-V curve tracer, and its less capable PVA-1500T2 cousin. “With ...
Fluke is aiming at mid-sized solar power installations with PVA-1500HE2, an analyser and I-V curve tracer rated at 1.5kVdc and 30A. Update: Later in the year, Fluke added a 1,500V solar multimeter and a matching 60A wireless current clamp “Similar products can often struggle to obtain accurate readings due to high capacitance levels and are incapable of recording data continuously ...
Fluke has introduced a series of product calibrators, intended to be used by people with “minimal training”, it said. “With demand for calibration growing every year, Fluke 5560A [right] defines a new class of multi-product calibrator by catering for new and inexperienced workers joining the calibration business without much training,” according to the company. “Key features include a large [7inch] display ...
Fluke is simulating an electric vehicle attached to a charging station with its latest tester. Called the FEV300, it allows the output of a Mode 3 ac charger with connector types 1 and 2 to be tested in accordance with IEC/HD 60364-7-722 and IEC/EN 61851-1. The stations provide a one or three phase supply at 230 or 400V. Mode 3 ...
Fluke has introduced two true-RMS clamp meters with electric field sensing scheme branded FieldSense. They are Fluke 377 and 378. “Technicians are able to simultaneously obtain accurate voltage and current measurements through the clamp jaw by connecting the meter to any electrical ground and clamping around the conductor. Conveniently, the display turns green when a stable FieldSense measurement is detected, ...
RS Components has added Fluke’s Tis20+ and Tis60+ handheld infrared thermal imaging cameras to its portfolio. Designed for one-handed fixed-focus image capture, the infrared imagers are suitable for engineers and technicians with less experience in thermal imaging. The manufacturer claims they allow accurate non-contact temperature measurement from a safe distance to reveal invisible thermal issues that cannot otherwise be detected. ...
RS Components has added the Fluke 87V Max true-RMS digital multimeter, IP67 rated for use by maintenance engineers in demanding industrial environments. An enhanced version of the 87V DMM, the 87V Max comes with an IP67 rated casing and doubled battery life, aiming at applications in motor drives, plant automation, power distribution and electromechanical equipment. The device’s casing is tested ...
The Fluke ScopeMeter 120B industrial handheld oscilloscope features a “Connect-and-View” and function which allows the instrument to recognise signal patterns and automatically set up the scope’s triggering, amplitude, and time base. Once a waveform is captured, the IntellaSet intelligent measurement detection automatically selects specific measurements based on the acquired waveform type and displays the most relevant measurement values, for example, ...
