Products

Toshiba has introduced four dual-channel 150Mbit/s digital isolators in 4.9  x 6 x 1.75mm surface-mount packaging. Options allow two channels in one direction, or one channel in each direction, and outputs that default high or low. They are: DCL520C00 2x forward, defaults low DCL520D00 2x forward, defaults high DCL521C00 1x forward, 1x reverse, defaults low DCL521D00 1x forward, 1x reverse, ...

Weidmuller has introduced a wire cutting and stripping attachment that slides onto any uninsulated screwdriver with a 3.5mm diameter shaft “so panel builders and machine builders can start working immediately in the field without needing to change tools”, said the company. Called Swifty CS, it can be used on solid copper conductors up to 1.5mm2 (16 AWG) and on stranded copper ...

According to the 2025 Connector Specifier and Buyer Survey, Harwin’s state-of-the-industry review, over half of engineers, CTOs and buyers working across the electronics industry expect their role will become more complex during the next year, making them somewhat trepidatious about going into 2026, writes Peter Schneid, Vice President of Marketing, Harwin. Figure 1: Over half of all engineers, CTOs and ...

Nisshinbo Micro Devices gas put out a J-FET input, dual op-amp for discerning audio applications in home, professional, portable, and aftermarket car audio systems. The MUSES8921 is the new standard J-FET model in the MUSES line up. It is engineered to reproduce the original signal with exceptional fidelity, capturing musical nuance, ambience, and silence with lifelike realism. The MUSES8921 is ...

JEDEC is nearing completion of a standard for low-profile LPDRAM modules developed specifically for data centre AI applications, it reports. It is the JESD328: LPDDR5/5X Small Outline Compression Attached Memory Module (SOCAMM2) Common Standard. The association says JESD328 is designed to provide a memory platform to deliver modular, low-power, high-bandwidth memory for AI CPU servers. Specifically, the new standard will ...

Pickering Interfaces has turned to mems relays from Menlo Micro for a PXI fault insertion tester that can simulate issues in high-speed Ethernet protocols up to MultiGBASE-T1. “Capability limitations mean that the high-speed bandwidth requirements of the latest MultiGBASE-T1 protocols cannot be supported with reed relays or electromechanical relays, dictating the use of mems switches,” Pickering product manager Steven Edwards. ...

Renesas has introduced 1GHz Arm Cortex-M85 microcontrollers, with or without a 250MHz Cortex-M33 co-processor. “The new MCUs deliver 7,300 Coremarks of compute performance. The optional Cortex-M33 core can act as a housekeeping MCU, executing system tasks while the high performance core stays in sleep mode,” said the company. “They are built on the same high-speed, low-power 22-nm ULL process used ...

A multi-domain passive module with functionality embedded in the substrate has been developed by Saras Micro Devices. The Saras Tile, or STILE, enables power regulation from system board to package. Saras’ approach is for vertical power delivery to reduce parasitic losses. Stacking the power stage and passive components in line with the die shortens the power path and reduces parasitic ...

Allegro MicroSystems has turned to tunnelling magnetoresistance (TMR) technology to make a 10MHz bandwidth current sensor with 50ns response time. “Our TMR technology is enabling current sensors that are ten times faster and four times lower noise versus typical Hall-based products,” according to the company, which has called it ACS37100. ACS37100 can “unlock the potential of fast-switching GaN and SiC ...

XP Power has added a digital control option to its HRF15 15W adjustable precision high-voltage dc-dc PSU series. There are three basic models, all 24Vin and all non-isolated: HRF1524S10K0* – 0 to 10kV at 1.5mA HRF1524S12K0* – 0 to 12kV at 1.25mA HRF1524S15K0* – 0 to 15kV at 1mA The main options on top of this are: Positive (*=P) or ...