Electronics related to industrial applications
Advantech is aiming at industrial AI with a computer that combines a 12th Gen Intel Core (i9, i7, i5 or i3) CPU with Nvidia’s L4 GPU. Two slim doors provide access for the company’s Flex I/O expansion boards Called MIC-770 V3, “this industrial edge solution is boasts 7,424 Cuda cores and 30.3Tflop/s with 24Gbyte GDDR6 GPU memory in a 72W ...
Two new industrial communications products from Brainboxes will be on the Farnell stand at the National Manufacturing Supply Chain Exhibition in Dublin. PE-505 is a 55 x 55 x 10mm five-port 10 and 100Mbit/s (10BASE-T/100BASE-T) isolated (1.5kV) Ethernet switch PCB with non-blocking layer 2 operation, that can be built into equipment. Operation is from 3.3V (1.3W) or 4.5 – 12V ...
P-Duke has announced ultra-wide input isolated 40W dc-dc converters for railway and industrial use. RED40-72xxxU converter will work over 14 – 160Vdc (11:1 range) and comes in a 2 x 1in (~25 x 50mm) footprint package. “Using just one dc-dc converter model for various supply voltages – 24, 28, 36, 48, 72, 96 or 110Vdc – in different regions avoids ...
EPC is aiming at eMobility, forklifts and high-power drones with a 150Arms brushless motor driver design using its GaN power transistors. Documents for EPC9186, as it will be known, are not available yet, but the company promises operation from 14V to 80V for “applications such as electric scooters, small electric vehicles and agricultural machinery” in addition to the items above. ...
Texas Instruments has releases an RS-485 transceiver that can be pin-programmed to suit networks with different bus voltage, logic voltage, network length and throughput. Called THVD1424, it includes switchable on-chip 120Ω termination resistor, slew rate control, and both half-duplex (two-wire) and duplex (four-wire) modes – allowing a single PCB type to be created that can be software re-configured for different ...
TDK-Lambda has introduced a series of rugged non-isolated 300W buck-boost dc-dc converters. The RGC series has a 9 to 53V imput range and adjustable output voltages of 9.6 to 48V (8Amax), or 5 to 28V (12.5Amax), depending on version. The idea is to cover 12, 18, 24, 36 and 48V batteries and power sources. Remote shut-down reduces input current to ...
Cosel has launched a fanless three-phase three-wire 3.5kW ac-dc power supply, aimed at world-wide operation from star or delta networks. Called HCA3500TF, the input range is 180 to 528Vac (for nominal 200V and 400V grids), and efficiency is up to 94% (400Vac in, 65V out) – the company puts the latter down to its digitally-controlled switching topology, and internal silicon ...
Colombia is a country with an ever-growing entrepreneurship – and innovation-oriented culture; something that’s clearly showcased by the 310 thousand new businesses created in 2022, out of which 309 thousand were microbusinesses. Their leading attribute is their human capital: professionals across the country’s regions who are highly qualified in all Industries 4.0 sectors and who are at clients’ complete disposal ...
Autronic has created an 80W dc-dc power supply for on-board railway use, which produces 12V (adjustable) from supplies between 14.4 and 154V, covering “all international on-board voltages from 24V to 110V in a single device”, it said. Dubbed HFBC80-W/Ks, output voltage is adjustable, and devices can be connected in parallel for more current. Efficiency can reach 92%. The units measure ...
Kyocera AVX has added four and five position options to its 5.6mm tall 9176-700 series of insulation displacement wire-to-PCB connectors. The connectors are soldered to the PCB in a tall state then, to terminate, insulated wires are inserted and the top of the connector is permanently pushed down to its final height. All four or five wires have to be ...
