Content related to medical electronics
The GPX10 Pro SoC has 10 programmable AI cores for a custom instruction set and is based on Ambient Scientific’s proprietarty DigAn architecture and MAC circuit design. The chip’s AI engine supports a variety of neural networking model types, including CNNs, RNNs, LSTMs and GRUs, locally at the edge. According to Ambient Scientific, the SoC offers up to 100x improvements ...
UK government agencies are announcing their intention to work together to support in-space manufacturing of pharmaceuticals. This is in terms of regulatory clarity and official support. It sees potential in developing the UK’s role in space-enabled manufacturing via a well-defined pathway. And such In-Orbit Manufacturing (IOM) is also one subset of the wider In-Orbit Servicing, Assembly, and Manufacturing (ISAM) market. ...
Finnish company Enedo Power has turned to GaN transistors to put a 1,200W ac-dc power supply into a 41 x 107 x 206mm (900cm3) volume. Called HDP1200, they run from 85 – 305Vac (de-rated to 1kW below 137Vac) and produce 24V or 48V depending on type, plus a 5V 1.5A stand-by output. Efficiency is up to 95.5%, and a fan ...
The Nebula AI series of touchscreen displays by Glory Star is now available from Crystal Display Systesm (CDS). Three sizes are offered – 10.1, 15.6 and 21.5-inch. They are powered by quad-core Cortex-A72/Cortex-A53 CPUs for multi-tasking and inference applications and have an integrated 6TOPS neural processing unit (NPU) for AI operations such as facial recognition, object tracking, text-to-speech and posture ...
Upon receipt of $6m in Chips Act funding, Oregon-based Rogue Valley Microdevices looked out-of-state to open its second facility. It will soon be opening the 50,000 sq ft facility in Palm Bay, Florida, expected to be the first 300mm-capable pureplay MEMS foundry in the US. “We tried for quite a few years to expand in Oregon,” said co-founder and CEO ...
Mouser is now shipping the AMD’s Spartan UltraScale+ FPGAs, based on the company’s UltraScale architecture for high I/O, low power applications. The FPGAs enable I/O expansion, sensor processing and control, and board management and are suitable for devices and sensors connected at the edge, including industrial automation, networking, robotics, wireless applications and industrial IoT. They are also suitable for data ...
Design, technology and development specialist AND Technology Research (ANDtr) has introduced an embedded electronics-based accelerator programme. The Embedded Accelerator is designed to help UK electronics designers and innovators to scale effectively and refine prototypes and attract investors. The 12-week programme will support up to 10 startups with a cost-effective way to build a physical prototype as well as mentoring support. ...
Drones are to be evaluated in the UK for delivering defibrillators to people experiencing out-of-hospital cardiac arrest (OHCA). The University of Surrey is running the study, with Air Ambulance Charity Kent Surrey Sussex (‘KSS’), and South East Coast Ambulance Service NHS Foundation Trust. “With survival rates for OHCA in the UK currently below 10%, a key challenge is the delay ...
SiTime has added 0.46 x 0.46mm 0505 CSP resonators to its timing portfolio, with the Titan MEMS platform. They are based on SiTime’s sixth-generation MEMS technology, FujiMEMS and are “at least four times smaller than the smallest legacy quartz alternatives” said the company. The resonators are available either PCB-mounted for customer integration, or as bare die for co-packaging with SoCs ...
CBM300S is a 300W fan-less ac-dc baseplate-cooled PSU, delivering 360W peak, in a 107 x 85 x 20mm brick. Made by Cinon and available through Relec, the supplies have closed-box construction and can accept power from 90 – 264Vac or 120 – 370Vdc. Different version offer outputs at 12, 15, 24, 28, 36, 48 or 54V. These can be trimmed ...
