Electronics related to industrial applications
APEC 2026: Power Integrations has implemented its GaN technology in its TOPSwitch flyback ICs to increase the power range to 400W. The company’s PowiGaN technology means that the flyback converters more than double power output to extend the power range above the conventional 250W to 440W for faster charging for e-bikes, mobility devices and industrial applications. They also exceed ErP ...
Synaptics is introducing its SYN765x single-chip device for using AI at the edge with smart IoT devices. It combines support for real-time intelligence with integrated Wi-Fi 7, aiming at battery-powered smart IoT devices, home automation systems, and Industrial IoT (IIoT). As well as the Wi-Fi 7, it integrates Bluetooth LE 6.0, and Thread/Zigbee across 2.4, 5 and 6GHz bands. And ...
An edge server and PLC controller for industrial automation, field comms and IoT edge applications by Sfera Labs are based on Raspberry Pi 4 and 5. The Strato Pi Plus edge server uses a Raspberry Pi RP2354 microcontroller to handle critical, real-time functions and system supervision, independently of the main processor. There is also an independent hardware watchdog designed to ...
Axivion for CUDA has been announced by Qt Group as part of Nvidia’s Halos AI Systems Inspection Lab for automated safety checking of robots and autonomous vehicles. It provides continuous GPU/CPU code analysis measured against Nvidia guidelines and industry standards and generates the documentation needed by Halos for sign-off. It also enables the early detection of problematic issues to reduce ...
Embedded World: Six Taiwanese companies gathered at the Taiwan pavilion to promote the island as a manufacturing partner and a hub for AI. Adlink, Advantech, Asus, DFI, iBase and Nexcom all presented AI-related products. Adlink presented compact COM modules, embedded systems and multi-GPU servers for industrial deployments. Advantech showed its edge AI acceleration, robotics and vertical-ready platforms, Asus presented ruggedised edge ...
Designed for home appliances, the GD32M531 32-bit microcontrollers were launched at Embedded World by GigaDevice. Based on an Arm Cortex-M33 core, operating at 180MHz, and integrates peripherals to control and optimise dual motor performance, with power factor correction. It also integrates DSP extensions and a floating-point unit. It is equipped with 256kB flash, 64kB Data-Flash, and 32kB SRAM, enabling it ...
Omron’s S8AS2 compact smart power supply combines DC power supply, electronic circuit protection, and real-time monitoring in one panel-mountable unit. Reducing the number of components required in the control cabinet will simplify panel design and wiring, highlights the company. Factory automation and industrial control applications are the main target for the system. S8AS2 features UL Class 2 output compliant, the ...
Toshiba has launched two sine-wave pulse width modulated (PWM) drive controllers – TC78B043FNG and TC78B043FTG – for three-phase brushless DC (BLDC) motors, which can support both surface permanent magnet (SPM) and interior permanent magnet (IPM) motor types with low noise and high efficiency. In recent years, there has been an increasing trend to use IPM types in preference to SPM ...
The TDK-Lambda HFE rack mount industrial power supply series now supports power levels of 3500W. The new series – HFE3500 – aims at applications including factory automation, industrial printing, RF transmission, base stations, and servers. And each 1U high 19” rack can accommodate up to four power supplies. They can deliver 13300W of bulk power or operate as a hot-swap ...
Power component maker Cissoid is announcing an IGBT power module aimed at industrial power conversion systems, the CMT-PLA1BL12300MA. CMT-PLA1BL12300MA The 1200V / 300A Half-Bridge IGBT is rated for 450A continuous DC current (Tj=90°C) based on Trench Gate Field Stop (TG-FS) technology. And it is housed in the CPAK-EDC package with a copper baseplate. The company highlights low saturation voltage and ...
