Electronics related to industrial applications
Toshiba is aiming at industrial programmable logic controllers with fast surface-mount photocouplers that have hysteresis in the signal path. They are amplified types with threshold detection and an open-drain output. Operation is across -40 to +125°C and the secondary side will run from between 2.7 and 5.5V, consuming ~1mA. Operation is specified at 3.3 and 5V. Input-referred hysteresis is typically ...
Over the last decades, Mean Well has become one of the most recognisable global providers of power supply modules and converters. However, its product range also includes a broad selection of other solutions, such as KNX equipment for building automation systems. The assortment described below includes modules compatible with the KNX system, i.e. a standard applied in home and industrial ...
Kaman Precision Products has range of mm-scale displacement sensors that work at temperatures up to 538°C and pressures up to 5,000psi. In use, they mount into a hole in one flat surface, and measure the distance to a nearby conductive flat surface parallel to the first. There are three basic types: KD-1925 1.27mm range 0.76μm resolution 5000psi max KD-1950 3.81mm ...
Powerbox is aiming at ground-based defense applications and harsh industrial environments with a 1,000W IP65 ruggedised ac-dc power supply series. ECD1000A comes in a metal enclosure with baseplate conduction cooling and can be used with the plate from -40 to +75°C, derated in some situations. Operation is from 85 to 305Vac (100 to 277Vac nominal) and output is 28Vdc 36A. ...
Sony has publicly released its “Camera Remote Command”, a list of commands enabling developers to remote control any of 29 Sony cameras. This removes restrictions to third party software to remotely control aspects of shooting, monitoring, and file transfer in Sony cameras, highlighted the company. Camera Remote Command Possible applications for Camera Remote Command include 3D image scanning (automating the ...
Sensor Technology has torque sensor accurate to ±0.1% of full-scale, that has its sensing head and electronics in separate housings. “This has two advantages,” according to the company. “The sensing head can fit into confined spaces, and the electronics can be located in a position where they are protected from physical damage, dust, dirt, moisture and electromagnetic forces.” Dubbed SGR530 ...
Concurrent Technologies has put Intel Atom x7000RE Amston Lake processors into a VME board, adding image processing and AI audio processing accelerators to the venerable form factor. CPU choice on the board, called Rhea, is either the four-core 1.5GHz x7433RE, or the two-core 2GHz x7213RE. “Whilst no longer the cutting edge of technology, VME continues to be a widely ...
Congatec announced SMARC modules based on Intel’s Atom x7000RE ‘Amston Lake’ processors. “Specially designed for industrial requirements, they deliver eight processor cores, double the previous generation, while maintaining the same power consumption,” according to Congatec. Called conga‑SA8, the modules are credit card size and operate over -40 to +85°C. Read all the latest news from Embedded World 2024 » AI ...
Supermicro has announced edge computers built around Intel’s Atom x7000RE processors. SYS-E100-14AM and SYS-E102-14AM mini-PCs have up to eight ‘Efficient’ cores had dissipate less than 12W. “While the SYS-E102 comes in a form factor of only 190 x 44 x 120 mm, these systems offer up to 16GB of DDR5-SODIMM, dual 2.5 GbE LAN ports, two independent HDMI ports, three ...
NXP has finally revealed the wireless versions of its MCX microcontrollers, first announced in mid-2022. “Featuring the industry’s first MCU with Bluetooth Channel Sounding, NXP’s MCX W series enables edge devices with secure multi-protocol wireless for Matter, Thread, Zigbee and Bluetooth Low Energy,” according to the company, which explained: “Bluetooth Channel Sounding standard improves the accuracy and security of distance ...
