Home » News » Design » Communications (page 5)

Communications

Electronica: TI’s Matter-enabled SDKs for Wi-Fi and Thread

TI Matter WiFi Thread pr photo

Texas Instruments has introduced Matter-enabled software development kits for  its Wi-Fi and Thread wireless microcontrollers. “Engineers can use the software and wireless MCUs, such as the CC3235SF and CC2652R7, to create low-power secure battery-powered smart home and industrial automation IoT applications that connect with devices across proprietary ecosystems,” according to the company. Matter is a royalty-free connectivity protocol developed by ...

Electronica: 30Gbit/s link has virtualised channels for automotive data streams

Inova-ADXpress-automotive-bus

Inova Semiconductors is proposing a 30Gbit/s bi-directional bus for vehicles, that will carry multiple separated data streams. Branded ADXpress, for ‘automotive data express’, “all raw sensor data can be transmitted via sensor-specific virtual data paths with deterministic latency to one or more evaluation units”, claimed the company. “The sensors can be connected to an ADXpress node via PCI Express, Ethernet ...

Government plans telecoms security lab in Solihull

andy-street Mayor of West Midlands

The government has announced a telecoms lab to be based in Solihull. “The first of its kind in the country, the lab will act as a secure research facility bringing together telecom operators, suppliers and academics to research and test ways of boosting the security, resilience and performance of the UK’s mobile networks,” according to the Department for Digital, Culture, ...

Industrial Ethernet switch has multiple pre-certified protocols

ADI ADIN2299 Ethernet switch

Analog Devices has introduced ADIN2299, a multi-protocol industrial 10/100Mbit/s Ethernet switch, designed to operate in a star, line or ring topologies. “The platform was pre-certified so that the field device can operate in any of the supported industrial Ethernet networks,” according to the company. “The module contains everything needed to participate in a EtherCat, Profinet real-time and isochronous real-time, EtherNet/IP ...

Laser connector system for CPO data centres

Molex MX080 optical

For hyperscale data centres, preparing for ‘co-packaged optics’ (CPO) Molex has announced a pluggable module for external laser sources, with a cage and blind-mating hybrid optical-electrical connector. It is called Elsis. “Traditional pluggable modules have their optical connections at the user side of the module, creating concerns about eye safety when used with high-power laser sources, such as those planned ...

MCU adds EtherCAT and other time-sensitive Ethernet to industrial equipment

Renesas RZN2L EtherCAT mcu

Renesas is aiming a set of microcontrollers at industrial equipment needing real-time Ethernet control. Dubbed RZ/N2L, the MCUs have an integrated time-sensitive networking (TSN) compliant three port Gigabit Ethernet switch and an EtherCAT slave controller. They support industrial network communication protocols including EtherCAT, Profinet RT, the new Profinet IRT, EtherNet/IP and OPC UA. “By using the RZ/N2L as a companion ...

Low-capacitance ESD protection for automotive data

Nexperia-bidirectional-snapback-300x200.jpg

Nexperia is aiming at protecting USB 3.2, HDMI 2.0 and LVDS data lines in vehicles with family of ESD (electrostatic discharge) protection diodes. “Additionally, this portfolio also aims to address the upcoming high-speed video-links as well as the Open Alliance multi-Gbit Ethernet applications”, according to the company. All variants come in 1 x 0.6 x 0.5mm leadless packages to improve ...

Bluetooth LE Audio specification complete, adding local audio broadcast

Bluetooth SIG LC3 codec chart

The Bluetooth Special Interest Group has announced the completion specifications that define LE Audio, the next generation of Bluetooth audio. LE Audio adds support for hearing aids and introduces ‘Auracast’ branded broadcast audio. It uses an LC3 (low complexity communications codec) to deliver its quality/bit-rate/energy balance. “Extensive listening tests have shown that LC3 will provide improvements in audio quality over ...

Tester supports Qualcomm 5G RAN NR sub-6GHz small cells

Anritsu MT8000A

Qualcomm has validated Anritsu’s MT8000A comms tester for sub-6GHz 5G NR small cells using Qualcomm’s 5G RAN platform and its QDART (development acceleration resource toolkit). “The Qualcomm FSM100 5G RAN Platform is a very capable 5G NR small cell solution that is used widely by mobile operators,” according to Anritsu. “The platform is designed to help OEMs reuse their software ...

I3C agreed as a bus for secure authentication

I3C ETSI sccure platform

The MIPI Alliance and ETSI have adopted the ‘I3C Interface for SSP’ specification, allowing the MIPI I3C Basic specification to serve as a physical and logical link layer for the ETSI SSP (Smart Secure Platform). ETSI SSP is a platform for USIM (universal subscriber identity module) and ‘secure elements’ for emerging IoT, 5G and other security-sensitive applications. SSP specifications define an open platform for multiple applications ...